All AbelCam functionality has been terminated October 8th 2019
 
 
 
Navigation

Opinions
Thanks again for writing such a nice program!
I am so impressed. FTP runs without missing a beat ... Something I have NEVER seen before from a cam program. Usually I get a few images undersize every day or the ftp fails a few times during the day. NOT with your program it runs flawless. Another thing is the quality of the ftp images is much better than my old software, yet the images are about 1/8 the size.... Just gain gain gain ....

 Ken Carpenter  more>>

 

Edit detail for Mobotix M20M revision 1 of 1

1
Editor: sse
Time: 2012/01/09 10:46:22 GMT+1
Note:

changed:
-
The mobotix cameras do not have a mechanical PTZ unit, but they provide Virtual PTZ through a web interface.

You can retrieve the parameters through this link:

http://your-mobotix-ip/control/click.cgi?help

The AbelCam Mobotix template has been configured using a Mobotix M22M

Camera Type

  PTZ set only, values are absolute

Calibration

  not required

Control Configuration

  Range

    Pan Min -1000 Max 2560

    Tilt Min -1000 Max 2048

    Zoom Min 1100 Max 4000  <br>Using Minimum Value 1000 disables PT functions, Max value > 4000 results in terribly blocky images

  Set

    The camera does not offer PTZ setting in one URL, but AbelCam supports to send two URLs at once. The URLs have to be seperated by ;time_in_miliseconds;

    URL for home position<br>

     /control/click.cgi?move&x=780&y=524;0;/control/click.cgi?zoom=1100


    URL to set PTZ values

     /control/click.cgi?zoom=#ZVALUE;0;/control/click.cgi?move&x=#PVALUE&y=#TVALUE

    The camera expects integer values.

  



The mobotix cameras do not have a mechanical PTZ unit, but they provide Virtual PTZ through a web interface.

You can retrieve the parameters through this link:

http://your-mobotix-ip/control/click.cgi?help

The AbelCam Mobotix template has been configured using a Mobotix M22M

Camera Type

PTZ set only, values are absolute

Calibration

not required

Control Configuration

Range

Pan Min -1000 Max 2560

Tilt Min -1000 Max 2048

Zoom Min 1100 Max 4000
Using Minimum Value 1000 disables PT functions, Max value > 4000 results in terribly blocky images

Set

The camera does not offer PTZ setting in one URL, but AbelCam supports to send two URLs? at once. The URLs? have to be seperated by ;time_in_miliseconds;

URL for home position

/control/click.cgi?move&x=780&y=524;0;/control/click.cgi?zoom=1100

URL to set PTZ values

/control/click.cgi?zoom=#ZVALUE;0;/control/click.cgi?move&x=#PVALUE&y=#TVALUE

The camera expects integer values.