Message has been edited, click here to see original content

Merry xmas

well, I managed to fix my cpu issue. Still using v 2.0.6 Logisphere. The problem was with my nVidia card - GF 7900GS (512 MB PCIe). I figured out that within the games the clock rates are much higher than in desktop. For nVidia display adapter it takes a while to lower clockrates switching from ingame to desktop (this is the exact point when I start logisphere when graphics cards mem clocks are higher).

Allso I noticed that because logisphere has a splash screen -> when I start logisphere without higher mem clocs, splash screen loads my QuickCam Sphere MP-1 very slowly. And when it does that, the cpu rates are high with LogiSphere (eg. 5 fps and 50% quality I get 50% cpu load for LogiSphere). When I start Logisphere with higher mem clocs, the splash screen loads fast and I don't have any cpu issues (eg. 5 fps and 50% quality I get 5% cpu load for LogiSphere).

I managed to fix the problem with my HW (Asrock 939DualSataII, AMD A64 3700+, 2x1024MB Corsair 400mhz DualChannel Kit, Gainward Bliss GF 7900GS 512MB, Audigy DR) by overclocking my graphics adapter from 450/1320 Mhz to @590/1560 Mhz (using Zalman VF900cu cooler instead of that stock cooler). Because of the high clockrates LogiSphere starts fast and cpu load is low. And now I don't have to start games before LogiSphere

And because of overclocking I managed to gain more performance to games. eg. with F.E.A.R gametest:

Edit: Settings for this gametest were: 1280x1024, AAx2, AFx4, and all the rest settings wehere in "Maximum"

FPS with default clock rates (450/1320)
Minimum. 31
Avaridge. 50
Maximum. 126

FPS with overclock (@590/1560)
Minimum. 47
Avaridge. 87
Maximum. 207